Turbosmart BOOST CONTROLLERS – ELECTRONIC - e-Boost2 (2005-cu Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 38
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
www.TURBOSMARTONLINE.com
15
Live mode menu
When the e-Boost2 is powered up, the display will automatically go into live mode. Pressing MODE ONCE will scroll through the live
mode menu.
Live Boost: Live boost is the default display and will display live boost or vacuum readings.
Live RPM: Live RPM will display the current RPM of the engine. If you have not connected your RPM signal then this parameter will
not appear.
Set Point: Shows the current set point value the unit is set to.
Peak Hold Boost: This function records the peak boost pressure the unit has measured. Each time a higher pressure is produced
the previous figure is discarded and the new pressure is recorded (value will reset when the unit is switched off)
Peak Hold RPM: This function records the peak RPM the unit has measured. Each time a higher RPM is produced the previous
figure is discarded and the new peak RPM is recorded (value will reset when the unit is switched off)
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

Comentarios a estos manuales

Sin comentarios